Identifying meter. Made in Great Britain.

Made in Great Britain like the Birdog. New Model Mark IV. Like the Birdog meter, this instrument will tell you when you have found the selected satellite from one of 3 Data Bases. Comes with Quality Nylon carry case with strap, AC Charger and DC Charger. Uses USB cable for data uploads. (Cable Not included)

High and low signal strength sensitivity ranges

Streamlined menu system

Use of the meter while charging

Switching mode power supply

Adjustable power off time

LNB function test from the meter

Super fast dataset selection

USB data transfer interface for updating firmware and datafiles.

 

• Easy selection and identification of chosen satellite

• Compatible with all transmissions: Ku and C band DVB and DSS

• Can be calibrated to suit local BER & Signal Strength conditions

• Four line display of the vital information. 

• Picture quality measurement to maximize the accuracy of both cross-polarity and pointing accuracy.

• Removable NiMH high-capacity battery

• Recharge in the field using car lighter adapter.

• LNB short circuit protection

• LNB power supply

• Shock absorbing ABS protective body

• Field replaceable F connector

• Control of 22kHz and DiSEqC-type switches (software controlled only - not user controlled)

• Simple use with a Six-button control panel.

• Robust and lightweight. The unit weighs less than one kilo (2.2 lbs)

Specifications:
RF Parameters

• Input signal frequency 950MHz~2050MHz

• Input digital signal level -65 dBm~25dBm

• LNB service voltage 13V / 18V

• LNB 22KHz switch ON/OFF

Satellite digital receiver parameters

• Reception standard DVB-DSS

• Modulation standard QPSK

• Symbol rate 3~40

• LNB polarization voltage control 13V/18V (Short-circuit self-protection)

• LNB 22KHz control ON/OFF

• LCD parameters

• Screen size 66.5mm-25mm

Power consumption

• Whole power consumption 600mhA

Power adapter parameters

• Power service voltage AC 120V~240V

• Power frequency 50-60 Hz

• Output voltage DC12V

• Output current 400mhA

• Adapter dimensions 80-50-80

• Adapter weight 280gms

Operating conditions

• Operating temperature 0C~80C

• Relative humidity 10%~90%

• Atmosphere pressure 86Kpa~106Kpa

• Dimensions 208-86-56